Exp-computer ThinLan 100 Manual de usuario

EXP PCMCIA Ethernet AdapterInstallation Guide

DEVICE=C:\DTECTEN.EXE /IRQ=11 /MEM=D8 /IO=300If you load the direct enabler without any switch, the program will use all defaultparameters. (IRQ=11, M

Installing Super-Client DriverThe super-Client driver is usually included with a Card and Socket Service driveron most notebooks. For example, CardSof

ETHERNET_802.2 (Novell 4.x networks)ETHERNET_SNAP (Used when 802.2 SNAP extension is required)ETHERNET_II (Networks connected to DEC machines or using

Windows 95 InstallationDue to the Plug-N-Play feature in Windows 95, the following dialog box will appearwhen the PCMCIA Ethernet card is inserted int

Setting up the networkGo to Control Panel then click on Network icon. (Figure 9)Figure 9 Control PanelAll the network settings for the PCMCIA Ethernet

ENABLING 32-BIT CARD SUPPORT OF WINDOWS 95Your system should be ready for PCMCIA socket support prior to operating thePCMCIA Ethernet Card. To check w

Window NT installationThis section provide some guide-line to install the PCMCIA Ethernet card underWindows NT. There are two different setup procedur

Window 4.0 installationFirst time installationDuring the initial installation you will have an opportunity to add aNetwork function. Make sure to sele

From the Network choose the appropriate tab applied to your networkoperation. (Figure 19) Click on the Add button to add network functions orservices,

Copyright 1997Revision 1.0 May 4, 1997No part of this publication may be reproduced, stored in a retrieval ortransmitted in any form or by any means,

FCC COMPLIANCE STATEMENTSThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FC

IntroductionCongratulations on your purchase of the Ethernet PC Card(PCMCIA) adapter. Thisadapter is designed to give you years of trouble-free and re

Installation OverviewBefore your computer system can recognize your PCMCIA Ethernet adapter, it isnecessary to run some software to enable it. This se

Ethernet card resources optionsThe Ethernet card requires system resources such as I/O (Input/Output)range, IRQ (Interrupt Request) and Memory. Depend

5. Installing the Ethernet PC Card AdapterTurn your computer off and insert the PCMCIA adapter (with label up) into theslot. The card is keyed to go

Press <Enter> to continue running the install program. The program will thendisplay the main menu screen. Choose “Setting Hardware” and Press &l

View the current configurationAfter the path name select ‘Continue’ or press <Esc> twice to return to the MainMenu. Select “View current configu