Exp-computer ThinLan 110 Manual de usuario descargar pdf

INTRODUCTION

This ThinLan is a credit-card-size Type II ThinLan card complies with the

PCMCIA Release 2.1 specification and supports IEEE 802.3u(100BaseT) and

802.3(10BaseT) standards. This adapter is designed to give you years of trouble-

free and reliable service. The drivers come with this card allow you to use the

most popular network Operating System (NOS) in the PC environment easily.

SYSTEM REQUIREMENTS

1. Notebook or desktop computer with a PCMCIA 2.1 Type II slot.

2. PC Card (PCMCIA/JEIDA) Card service and Socket device driver compliant

preferred. (If the drivers are not present, the Point Enabler for Intel 82365SL

Personal Computer Interface Controller PCIC or compatible will be installed.

(MS-DOS system)

3. One of the following Operating Systems: DOS Version 5.0 or higher, Windows

3.x, Windows 95, or Window NT Version 3.51, 4.0.

4. Network Operating System specific files. (depending on your Network type)

HARDWARE INSTALLATION

1. Connect the cable of the ThinLan PC Card with the PC Card. (Note: the 15-

pin keyed connector can be easily attached to the card if you are plugging it

with the right side up. )

2. Locate the PCMCIA slot. If you are not sure of this, consult your computer’s

user manual for the location of the PCMCIA socket.

3. Align the ThinLan PC Card with the arrow sign pointing toward the computer

s socket. And you can also see the card is keyed to guide the proper

installation.)

4. Slowly insert the Ethernet card into the slot and press firmly until the Ethernet

connector is seated.

5. Hardware installation is now completed. The Ethernet card will obtain power

directly from the computer. You are now ready to install the ThinLan PC Card

device driver.

1 2 3 4 5 6 7 8 9

Indice de contenidos

Pagina 1 - HARDWARE INSTALLATION

INTRODUCTIONThis ThinLan is a credit-card-size Type II ThinLan card complies with thePCMCIA Release 2.1 specification and supports IEEE 802.3u(100Base

Pagina 2 - Figure 3

SOFTWARE INSTALLATION FOR DOS/WINDOWS 3.1The ThinLan PC Card provides both Netware DOS ODI and NDIS device driver.Before proceeding the installation

Pagina 3

Then a screen as illustrated below will ask you if you want to install the PointEnabler only or together with the Netware ODI driver. Select the one

Pagina 4 - WINDOWS 95 INSTALLATION

where <type> is Ethernet_802.3, Ethernet_802.2, Ethernet_II,Ether_SNAP. Defaults to Ethernet_802.2 if not present. You must beusing a frame typ

Pagina 5

Insert the ThinLan PC Card device driver disk into your floppy drive. Specify thedirectory as A:\WIN95 (or B:\ whichever drive contains the diskette)

Pagina 6

ENABLING 32-BIT CARD SUPPORT OF WINDOWS 95Your system should be ready for PCMCIA socket support prior to operating theThinLan PC card. To check whethe

Pagina 7 - WINDOWS NT INSTALLATION

WINDOWS NT INSTALLATIONThis section provides some guide-line to install the ThinLan PC Card underWindows NT. There are two different setup procedures

Pagina 8

From the Network settings screen you should be able to select and configure thenetwork protocol, change the computer name etc. Consult the Windows NT

Pagina 9

From the Network screen choose the appropriate tab applied to your networkoperation. Click Add button to add network functions or services, protocol e

Modelos relacionados ThinLan 120

Comentarios a estos manuales

Sin comentarios

Exp-computer ThinLan 110 Manual de usuario

Busca en linea o descarga Manual de usuario para Accesorios De Computador Exp-computer ThinLan 110. EXP Computer ThinLan 110 User Manual Manual de usuario

Indice de contenidos

Modelos relacionados ThinLan 120

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Exp-computer ThinLan 110