Exp-computer Bluetooth: Wireless HotSync of the Handspring Viso Manual de usuario descargar pdf

Application Note

Wireless HotSync of the Handspring Visor

2002/6/24

Trademark(s) . and Registered Trademark(s) ®

WIDCOMM, the WIDCOMM logo, BlueConnect, BlueShare and BTW are trademarks

of WIDCOMM, Inc.

The Bluetooth trademarks are owned by Telefonaktiebolaget L M Ericsson, Sweden and

used by WIDCOMM under license.

Handspring, Visor, Springboard, and HotSync are trademarks/registered trademarks of

Handspring, Inc.

Palm OS is a registered trademarks of Palm, Inc.

Other brand and product names may be registered trademarks or trademarks of their

respective holders.

1 Introduction

As a technology leader in the wireless networking market, WIDCOMM’s vision is to enable

consumers to easily, conveniently and securely access information and services from their

Bluetooth devices anytime and anywhere – from homes, offices and public places.

　 BlueShare™ is a Bluetooth USB radio module for your desktop or laptop computer that

is fully interoperable with the WIDCOMM BlueConnect™ module.

　 BTW™ is a set of software drivers and utilities that seamlessly integrate Bluetooth

technology into your desktop or laptop computer.

　 BlueConnect™ is a Bluetooth Springboard™-compatible radio module for the

Handspring™ Visor™ that is fully interoperable with the WIDCOMM BlueShare™

family of Bluetooth devices.

This document describes the procedure for demonstrating the use of the Serial Port Profile

(SPP) to wirelessly HotSync® applications onto a Handspring Visor. Doing so requires a

BlueConnect module on the Handspring Visor and a BlueShare dongle on a Microsoft Windows

Laptop or Desktop computer. This document was tested using the following configuration:

　 A desktop or laptop computer with an available USB interface and running the

Microsoft Windows 2000 operating system.

　 BTW version 1.0.0.

　 A standard version of the Handspring Visor (running the Palm OS version 3.1) with a

BlueConnect card running the WIDCOMM version 2.2G software.

NOTE: This procedure was tested under Windows 2000 only. On a computer

running other

versions of the Microsoft Windows operating system, this procedure may be slightly

different.

NOTE: This procedure was on a Visor running the PalmOS version 3.1 only. On a

computer

running other versions of the Palm operating system, this procedure may be slightly

different.

2 A Quick Overview of the Procedure

The basic procedure for running this demonstration is fairly simple. On the Visor side, HotSync

operates as if it was using a serial port connection. Instead of a physical serial cable connecting

the two computers, a Bluetooth wireless link is used to simulate a serial link. On the

BTW/Windows side, the HotSync uses a Windows Virtual COMM port instead of a physical

1 2 3 4 5 6 ... 15 16

Indice de contenidos

Pagina 1 - Application Note

Application Note Wireless HotSync of the Handspring Visor 2002/6/24 Trademark(s) . and Registered Trademark(s) ® WIDCOMM, the WIDCOMM logo, Bl

Pagina 2 - 3. Setup

4. Tap the “Generic Serial” service in order to select it. 5. Return to the application launch screen by tapping the icon. IMPORTANT NOTE: At thi

Pagina 3

3) Finally, the install tool will confirm that these files will be installed on your Visor. Click on “OK” to 4.2 INITIATE THE HOTSYNC ON THE VI

Pagina 4

3) Return to the main menu by tapping the icon. 4) Tap on the icon. You should see the following display:

Pagina 5 - → Details option. This

5) Tap on the icon. This will initiate the HotSync. 4.3 WHAT YOU SHOULD SEE ON THE VISOR As the HotSync progresses, you should see a dialog dis

Pagina 6

4.4 WHAT YOU SHOULD SEE ON THE PC As the HotSync operation proceeds, the two computers will connect using the “Generic Serial” service. The “Loca

Pagina 7 - LUECONNECT SETUP

Device Address of the BlueShare unit is displayed for this connection. In addition, the progress of the HotSync will be reported in a “HotSync Progr

Pagina 8

6. For Troubleshooting or Further Information For additional technical information or troubleshooting advice, see the following WIDCOMM documents:

Pagina 9

serial port. Here is a quick overview of the process: 1) Install BTW and BlueShare on your Windows Computer (98SE, 2000, or Me version) 2) Install

Pagina 10 - 4. Perform the HotSync

NOTE: This picture shows the BlueShare hardware only. The BTW software is supplied on a separate CD [not shown].

Pagina 11 - 1) Tap the icon

Connect the USB cable to the jack shown above and to the matching USB connector on your PC, laptop computer, or USB hub. This concludes the physical

Pagina 12

NOTE: It is important later in the process to use the View → Details option. This setting will allow you to view the details of your SPP connection

Pagina 13

Examine the “Generic Serial” service under the “Status” column. You will notice that the service is started and that COM4 will be the next virtual

Pagina 14

NOTE: The version of the Palm desktop software that was used in the demonstration (desktop software for the Palm OS 3.1) only allows COM port sele

Pagina 15 - OW LONG DOES IT TAKE?

3.2.2 Configure the Visor for Local HotSync There are many ways to HotSync a Visor. In order to do so over Bluetooth, you must have your HotSync

Pagina 16

1. On the Visor, run the “Discover” application by tapping on the icon to start up the Bluetooth stack. The application will start by displaying a

Comentarios a estos manuales

Sin comentarios

Exp-computer Bluetooth: Wireless HotSync of the Handspring Viso Manual de usuario

Busca en linea o descarga Manual de usuario para Accesorios De Computador Exp-computer Bluetooth: Wireless HotSync of the Handspring Viso. EXP Computer Bluetooth: Wireless HotSync of the Handspring Visor User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Exp-computer Bluetooth: Wireless HotSync of the Handspring Viso