Exp-computer C4077-90960 Manual de usuario descargar pdf (Pagina 175)

100

101

PCA, Output Paper Sensor

1 Remove the following components in the order listed:

• Toner Cartridge

• Formatter Assembly (see Figure 6-24)

• AC Access Cover (see Figure 6-3)

• Top Cover (see Figure 6-8)

• Back Cover (see Figure 6-4)

• Fan 3 and Housing Assembly (see Figure 6-20)

• HVPS (see Figure 6-40)

• DC Controller PCA (see Figure 6-32)

2 Remove (7) screws, CH101 (Figure 6-33, callout 1) and remove the

Formatter PCA cage.

3 Remove (5) screws, CH101 (Figure 6-34, callout 2) and remove the

Formatter PCA grounding strip.

4 Remove (3) screws, CH102 (Figure 6-35, callout 3) and remove the plastic

PCA shield. (Note the positioning of the metal grounding fingers at the left

of the shield.)

5 Unplug the connector (Figure 6-36, callout 4).

6 Remove (2) screws, CH101 (Figure 6-36, callout 5), and unplug the

connector on the back side of the PCA.

To Reinstall:

Make sure that the sensor flags rotate freely, and that the top cover and

Diverter doors operate the microswitch (SW1401).

6-48 Removal and Replacement

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 407 408

Comentarios a estos manuales

Sin comentarios

Exp-computer C4077-90960 Manual de usuario Pagina 175

Comentarios a estos manuales